The Valve Chart provided information on the valves
associated with the different components in the drawing. In the drawing area,
valves are annotated with a letter which matches to a valve record provided in
this chart.
Accessed by selecting the
node in the
Settings interface.
The fields in this page define the position for the valve
chart as well as parameters for the chart size, color and text height.
Define the properties per the fields described below and
Save the changes.
The Close icon closes the Project Settings interface, so
make sure your changes are saved. You will be prompted to save them it you
haven't already.
The Load Defaults icon in the main
Settings interface will return the settings of the options
page to their original values.
| Setting | Description |
|---|
| Label and Column Width
|
Use these fields to define the width of the columns
in the Valve Chart.
|
| Mapping
|
The Mapping column lets you select a property to display:
|
| Valve Data
|
In this section define the properties for the Valve
data text and the Valve Chart.
- Row Height: Enter a
height for the Valve rows.
- Units: Select the
valve size unit to use from the drop down list (Imperial , Metric).
- Color: Click the
icon and select a color from Color Table for the label text.
- Text Type: Select a
text type for the label from the drop down list. You can click the "..." option
at the bottom of the list to display the Microstation Text Styles dialog
allowing you to modify the text styles if desired.
- Text Height: Enter a
text height dimension into the field provided.
|
| Base Position
|
- Text Justification:
This option determines the base point from chich the Valve Chart is placed in
the drawing. Select from:
- Upper Left
- Lower Left
- Upper Right
- Lower Right
- Chart Color: Click
the icon and select a color from the Color table to define the color of the
chart grid lines.
- Position: You can
opt to enter an exact position directly in the Position X and Position Y fields
or click the Position Locate
 icon to the right of the fields
to pick the position in the drawing.
|
| Line Number Data
|
In this section define the properties for the Line
Number Data text.
- Row Height: Enter a
height for the Valve rows.
- Color: Click the
icon and select a color from Color Table for the label text.
- Text Type: Select a
text type for the label from the drop down list. You can click the "..." option
at the bottom of the list to display the Microstation Text Styles dialog
allowing you to modify the text styles if desired.
- Text Height: Enter a
text height dimension into the field provided.
|
